Viaterra Wayne – Urban Riding Jacket (Khaki)

Description

Specifications

Outer shell:
Heavy duty 100% cotton canvas
Warp knit polyester mesh
Natural leather
YKK Zippers – Original YKK zippers & pullers for extra durability and smooth operation of zips.
Ergonomics designed for riding position.
Comfort and ventilation during long rides

Inner shell:
Polyester inner mesh lining

Weight: 1.3 kg

Wayne jacket doesn’t come with the protectors. You can choose the protectors for elbows/ shoulders/ back here https://motowilder.in/product-category/riding-gear/body-armour-armour-inserts/

Care and Storage

IMPORTANT NOTE:
Body armours/ protectors (if any) must always be removed before starting the washing process

CLEAN & CARE:
For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER)
DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.
For longer life of the fabric, we recommend hand washing the jacket using mild detergent
Do not place your jacket near, or come in contact with a direct heat source
Dry the jacket on a hanger away from direct sunlight where there is good ventilation.
Zippers need to be cleaned and lubricated regularly – you can use Vaseline or candle wax
Leather needs to be conditioned after every wash cycle to replenish the natural oils within.

STORAGE:
Make sure your jacket is completely dry before you store it on a hanger.
If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
Do not store the jacket in air-tight plastic bags

How to measure size for the jacket

Things to keep in mind to ensure the measurements are taken correctly
– It will be helpful to have a family member or a friend take the measurements
– Please use flexible tape only, like a tailor’s tape
– All the measurements must be in the same units, whether cm or inches
– You should preferably be wearing base layers while taking measurements, and avoid anything bulky

STEP 1 – Measure using a tailor’s tape
There are two key measurements that you need to take into consideration for figuring out your jacket size.
A) Chest – Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally.
B) Waist – Measure the circumference of your waist over the belly button. Keep the tape parallel to the ground, not too loose or too tight.

STEP 2 – Find your jacket size by checking measurements against the size chart provided
– If both the measurements do not fall in one particular size – use the larger of the two measures to choose the jacket size.
– If the two measurements are on the borderline between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference.
Remember, each brand has its own body size charts, so do check the chart before you select the size.

Fitment

If you are trying it on at the store, wear it for 5-10 min to get comfortable in it. Keep in mind that the Wayne is designed to work best in the riding posture with the arms forward. So other movements could feel restrictive.